Model arcadyanastoria_easybox_904_lte
Flashing via TFTP
- Download the factory firmware image offered above to your Computer.
- Configure a computer with static IP /24 and a TFTP server. On Debian or Ubuntu you can use either the tftpd-hpa or tftpd server packages.
- Rename the downloaded firmware image to `` and place it
in the tftp server’s root directory. (If using tftpd-hpa this is
/var/lib/tftpboot/; if tftpd, it is/srv/tftp/) You can test that the file is downloadable withtftp localhost and get. - Connect the computer to one of the router’s Ethernet ports while the router is off. Press and keep pressed the router’s reset button and power it up. After about 7-10 seconds release the reset button. The power LED will flicker rapidly for ~3 seconds, indicating download of the firmware file.
- The router will write the firmware to flash during ~40 more seconds of occasional power LED blinks, and then will reboot by itself, ready for use.
Comments
General
There is already OpenWrt Backfire 10.03 on the box.
WLAN
only internal antennas
Installation
Serial login and use mtd utils.
| Arcadyan / Astoria Easybox 904 LTE | |
|---|---|
|
|
| Latest release | Unknown |
| Device Type | WiFi Router |
| Vendor | Arcadyan / Astoria |
| Model | Easybox 904 LTE |
| Flash | 512 MB |
| RAM | 128 MB |
| CPU | Lantiq XWAY VRX288 (lantiq) 2 x 500MHz |
| Ethernet ports | 4 x GBit — 0 x 100Mbit |
| WiFi |
2.4Ghz: b/g/n 5Ghz: a/n/ac |
| USB | 2x 2.0 |
| Switch | Realtek RTL8366RB |
| Bootloader | U-Boot |
| Power Supply | 12 VDC, 2.5 A |
| Serial | check_circle |
| Additional resources | |