Model engenius_ecb1750_1

Flashing via TFTP

  • Download the factory firmware image offered above to your Computer.
  • Configure a computer with static IP /24 and a TFTP server. On Debian or Ubuntu you can use either the tftpd-hpa or tftpd server packages.
  • Rename the downloaded firmware image to `` and place it in the tftp server’s root directory. (If using tftpd-hpa this is /var/lib/tftpboot/; if tftpd, it is /srv/tftp/) You can test that the file is downloadable with tftp localhost and get .
  • Connect the computer to one of the router’s Ethernet ports while the router is off. Press and keep pressed the router’s reset button and power it up. After about 7-10 seconds release the reset button. The power LED will flicker rapidly for ~3 seconds, indicating download of the firmware file.
  • The router will write the firmware to flash during ~40 more seconds of occasional power LED blinks, and then will reboot by itself, ready for use.

Comments

WLAN

2.4GHz MIMO 3x3:3, 5.0GHz MIMO 3x3:3

EnGenius ECB1750 v1
Latest release Unknown
Device Type WiFi Router
Vendor EnGenius
Model ECB1750
Flash 16 MB
RAM 128 MB
CPU Qualcomm Atheros QCA9558 (ath79)
1 x 720MHz
Ethernet ports 1 x GBit — 0 x 100Mbit
WiFi

2.4Ghz: b/g/n

5Ghz: a/n/ac

Bootloader U-Boot
Power Supply 12 VDC, 2.0 A, PoE 48 VDC 0.375 A
Serial check_circle
Additional resources