Model netgear_r6100

Flashing via TFTP

  • Download the factory firmware image offered above to your Computer.
  • Configure a computer with static IP /24 and a TFTP server. On Debian or Ubuntu you can use either the tftpd-hpa or tftpd server packages.
  • Rename the downloaded firmware image to `` and place it in the tftp server’s root directory. (If using tftpd-hpa this is /var/lib/tftpboot/; if tftpd, it is /srv/tftp/) You can test that the file is downloadable with tftp localhost and get .
  • Connect the computer to one of the router’s Ethernet ports while the router is off. Press and keep pressed the router’s reset button and power it up. After about 7-10 seconds release the reset button. The power LED will flicker rapidly for ~3 seconds, indicating download of the firmware file.
  • The router will write the firmware to flash during ~40 more seconds of occasional power LED blinks, and then will reboot by itself, ready for use.

Comments

WLAN

2x2

Netgear R6100
Latest release 18.06.2 Discontinued
Device Type WiFi Router
Vendor Netgear
Model R6100
Flash 128 MB
RAM 128 MB
CPU Atheros AR9344 (ar71xx)
1 x 560MHz
Ethernet ports 0 x GBit — 5 x 100Mbit
WiFi

2.4Ghz: b/g/n

5Ghz: a/n/ac

USB 1x 2.0
Switch Atheros AR9344
Bootloader U-Boot
Power Supply 12 VDC, 1.5 A
Serial check_circle
Additional resources