Model ocedo_koala
Flashing via TFTP
- Download the factory firmware image offered above to your Computer.
- Configure a computer with static IP /24 and a TFTP server. On Debian or Ubuntu you can use either the tftpd-hpa or tftpd server packages.
- Rename the downloaded firmware image to `` and place it
in the tftp server’s root directory. (If using tftpd-hpa this is
/var/lib/tftpboot/; if tftpd, it is/srv/tftp/) You can test that the file is downloadable withtftp localhost and get. - Connect the computer to one of the router’s Ethernet ports while the router is off. Press and keep pressed the router’s reset button and power it up. After about 7-10 seconds release the reset button. The power LED will flicker rapidly for ~3 seconds, indicating download of the firmware file.
- The router will write the firmware to flash during ~40 more seconds of occasional power LED blinks, and then will reboot by itself, ready for use.
Flash layout
| Region | Label |
|---|---|
0xff0000-0x010000 |
art |
0xed0000-0x110000 |
data |
0x050000-0x740000 |
firmware |
0xfe0000-0x010000 |
id |
0x000000-0x040000 |
u-boot |
0x040000-0x010000 |
u-boot-env |
0x790000-0x740000 |
vendor |
Comments
General
For ath79 installation see https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=c4931713df8ffb3c4e5c1be7d0b6d4aa96a7dd4c
Installation
Hold down the reset button while powering on the device. It will load a ramdisk image named ‘koala-uImage-initramfs-lzma.bin’ from 192.168.100.8
| Ocedo Koala | |
|---|---|
| Latest release | 18.06.2 Discontinued |
| Device Type | WiFi AP |
| Vendor | Ocedo |
| Model | Koala |
| Flash | 16 MB |
| RAM | 128 MB |
| CPU | Qualcomm Atheros QCA9558 (ar71xx-ath79) 1 x 720MHz |
| Ethernet ports | 1 x GBit — 0 x 100Mbit |
| WiFi |
2.4Ghz: b/g/n 5Ghz: a/n/ac |
| Bootloader | U-Boot |
| Power Supply | 12 VDC, 2.0 A |
| Serial | check_circle |
| Additional resources | |