Model ocedo_raccoon

Flashing via TFTP

  • Download the factory firmware image offered above to your Computer.
  • Configure a computer with static IP /24 and a TFTP server. On Debian or Ubuntu you can use either the tftpd-hpa or tftpd server packages.
  • Rename the downloaded firmware image to `` and place it in the tftp server’s root directory. (If using tftpd-hpa this is /var/lib/tftpboot/; if tftpd, it is /srv/tftp/) You can test that the file is downloadable with tftp localhost and get .
  • Connect the computer to one of the router’s Ethernet ports while the router is off. Press and keep pressed the router’s reset button and power it up. After about 7-10 seconds release the reset button. The power LED will flicker rapidly for ~3 seconds, indicating download of the firmware file.
  • The router will write the firmware to flash during ~40 more seconds of occasional power LED blinks, and then will reboot by itself, ready for use.

Flash layout

Region Label
0xff0000-0x010000 art
0xed0000-0x110000 data
0x050000-0x740000 firmware
0xfe0000-0x010000 id
0x000000-0x040000 u-boot
0x040000-0x010000 u-boot-env
0x790000-0x740000 vendor

Comments

General

The U-Boot won’t boot with the serial attached. Boot the device without serial attached and attach it after 3 seconds.

Ocedo Raccoon
Latest release snapshot Discontinued
Device Type WiFi AP
Vendor Ocedo
Model Raccoon
Flash 16 MB
RAM 128 MB
CPU Atheros AR9344 (ath79)
1 x MHz
Ethernet ports 1 x GBit — 0 x 100Mbit
WiFi

2.4Ghz: b/g/n

5Ghz: a/n

Bootloader U-Boot
Power Supply 12 VDC, 2.0 A
Serial check_circle
Additional resources