Model raspberry_pi_3_bplus
Comments
General
The bootloader is an image on MicroSD Card (the data partition can be resized to provide more storage), you may need to boot up Raspbian (released in or after April 2018) and set up WiFi country-code first before install OpenWrt
Recovery
Use an existing computer to flash disk image to MicroSD card
Installation
Use an existing computer to flash disk image to MicroSD card
| Raspberry Pi Foundation Raspberry Pi 3 B+ | |
|---|---|
| Latest release | 18.06.2 |
| Device Type | Single Board Computer |
| Vendor | Raspberry Pi Foundation |
| Model | Raspberry Pi 3 |
| Flash | 0 MB warning |
| RAM | 1024 MB |
| CPU | Broadcom BCM2837B0 (brcm2708) 4 x 1400MHz |
| Ethernet ports | 1 x GBit — 0 x 100Mbit |
| WiFi |
2.4Ghz: b/g/n 5Ghz: a/n/ac |
| Switch | LAN7515 |
| Power Supply | 5 VDC, 2.5 A |
| Serial | check_circle |
| Additional resources | |