Model tp-link_archer_c7r_wdr7500_v5-0

Installation

Flashing via webinterface

  • Download the factory firmware image offered above to your Computer.
  • Connect your Computer to a LAN port of the TP-link. If the configuration was not changed, the DHCP on the router will give you a 192.168.0.X address and the TP-link web administration page is 192.168.0.1. (User: admin, Password: admin) Under System Tools select Firmware Upgrade. Browse to the previously downloaded ** file. Click Upgrade.
  • If the Webinterface tells you You have no authority to access this router! that’s because your browser does not send the correct HTTP referer header. Disable addons or use a different browser.
  • Connect to 192.168.1.1 with your web browser
  • Set your password and configure the router through the web UI. Basic Config Congratulations! You just installed OpenWrt on your Router!
TP-Link Archer C7R WDR7500 v5.0 (CN)
Latest release Unknown
Device Type WiFi Router
Vendor TP-Link
Model Archer C7R WDR7500
Flash 8 MB
RAM 128 MB
CPU Qualcomm Atheros QCA9558 (ar71xx)
1 x 720MHz
Ethernet ports 5 x GBit — 0 x 100Mbit
WiFi

2.4Ghz: b/g/n

5Ghz: a/n/ac

USB 2x 2.0
Switch Atheros AR8327N
Bootloader U-Boot
Power Supply 12 VDC, 2.0 A
Serial check_circle
Additional resources