Model tp-link_re355

Installation

Flashing via webinterface

  • Download the factory firmware image offered above to your Computer.
  • Connect your Computer to a LAN port of the TP-link. If the configuration was not changed, the DHCP on the router will give you a 192.168.0.X address and the TP-link web administration page is 192.168.0.1. (User: admin, Password: admin) Under System Tools select Firmware Upgrade. Browse to the previously downloaded openwrt-18.06.2-ar71xx-generic-re355-v1-squashfs-factory.bin file. Click Upgrade.
  • If the Webinterface tells you You have no authority to access this router! that’s because your browser does not send the correct HTTP referer header. Disable addons or use a different browser.
  • Connect to 192.168.1.1 with your web browser
  • Set your password and configure the router through the web UI. Basic Config Congratulations! You just installed OpenWrt on your Router!

Comments

WLAN

MIMO 3x3

TP-Link RE355 v1
Latest release 18.06.2
Device Type Range Extender
Vendor TP-Link
Model RE355
Flash 8 MB
RAM 128 MB
CPU Qualcomm Atheros QCA9558 (ar71xx)
1 x 720MHz
Ethernet ports 1 x GBit — 0 x 100Mbit
WiFi

2.4Ghz: b/g/n

5Ghz: a/n/ac

Switch Qualcomm Atheros AR8035-A
Bootloader U-Boot
Power Supply 100-240 VAC, 0.3 A
Serial check_circle
Additional resources