Model tp-link_tl-wr810n_v1-1_eu

Installation

Flashing via webinterface

  • Download the factory firmware image offered above to your Computer.
  • Connect your Computer to a LAN port of the TP-link. If the configuration was not changed, the DHCP on the router will give you a 192.168.0.X address and the TP-link web administration page is 192.168.0.1. (User: admin, Password: admin) Under System Tools select Firmware Upgrade. Browse to the previously downloaded openwrt-18.06.2-ar71xx-generic-tl-wr810n-v1-squashfs-factory.bin file. Click Upgrade.
  • If the Webinterface tells you You have no authority to access this router! that’s because your browser does not send the correct HTTP referer header. Disable addons or use a different browser.
  • Connect to 192.168.1.1 with your web browser
  • Set your password and configure the router through the web UI. Basic Config Congratulations! You just installed OpenWrt on your Router!
TP-Link TL-WR810N v1.1 (EU)
Latest release 18.06.2 Discontinued
Device Type Travel Router
Vendor TP-Link
Model TL-WR810N
Flash 8 MB
RAM 64 MB
CPU Qualcomm Atheros QCA9531 (ar71xx-ath79)
1 x 650MHz
Ethernet ports 0 x GBit — 2 x 100Mbit
WiFi

2.4Ghz: b/g/n

USB 1x 2.0
Switch Qualcomm Atheros QCA9531
Bootloader U-Boot
Power Supply 230 VAC
Serial check_circle
Additional resources