Model tp-link_tl-wr847n_v8

Installation

Flashing via webinterface

  • Download the factory firmware image offered above to your Computer.
  • Connect your Computer to a LAN port of the TP-link. If the configuration was not changed, the DHCP on the router will give you a 192.168.0.X address and the TP-link web administration page is 192.168.0.1. (User: admin, Password: admin) Under System Tools select Firmware Upgrade. Browse to the previously downloaded openwrt-18.06.2-ar71xx-tiny-tl-wr847n-v8-squashfs-factory.bin file. Click Upgrade.
  • If the Webinterface tells you You have no authority to access this router! that’s because your browser does not send the correct HTTP referer header. Disable addons or use a different browser.
  • Connect to 192.168.1.1 with your web browser
  • Set your password and configure the router through the web UI. Basic Config Congratulations! You just installed OpenWrt on your Router!

Comments

General

TL-WR847N v8 is a rebranded model of WR841N v8 with updated bootloader. Hardwarewise identical.

TP-Link TL-WR847N v8
Latest release 18.06.2 Discontinued
Device Type WiFi Router
Vendor TP-Link
Model TL-WR847N
Flash 4 MB warning
RAM 32 MB
CPU Atheros AR9341 (ar71xx)
1 x 535MHz
Ethernet ports 0 x GBit — 5 x 100Mbit
WiFi

2.4Ghz: b/g/n

Switch Atheros AR9341
Bootloader U-Boot
Power Supply 9 VDC, 0.6 A
Serial check_circle
Additional resources