Model tp-link_tl-wr941n_v7_cn
Installation
Flashing via webinterface
- Download the factory firmware image offered above to your Computer.
- Connect your Computer to a LAN port of the TP-link. If the configuration was
not changed, the DHCP on the router will give you a 192.168.0.X address and
the TP-link web administration page is 192.168.0.1.
(User: admin, Password: admin) Under System Tools select Firmware
Upgrade. Browse to the previously downloaded ** file.
Click Upgrade.
- If the Webinterface tells you You have no authority to access this router!
that’s because your browser does not send the correct HTTP referer header.
Disable addons or use a different browser.
- Connect to 192.168.1.1 with your web browser
- Set your password and configure the router through the web UI. Basic Config
Congratulations! You just installed OpenWrt on your Router!