Model wiznet_wizfi630a

Flashing via TFTP

  • Download the factory firmware image offered above to your Computer.
  • Configure a computer with static IP /24 and a TFTP server. On Debian or Ubuntu you can use either the tftpd-hpa or tftpd server packages.
  • Rename the downloaded firmware image to `` and place it in the tftp server’s root directory. (If using tftpd-hpa this is /var/lib/tftpboot/; if tftpd, it is /srv/tftp/) You can test that the file is downloadable with tftp localhost and get .
  • Connect the computer to one of the router’s Ethernet ports while the router is off. Press and keep pressed the router’s reset button and power it up. After about 7-10 seconds release the reset button. The power LED will flicker rapidly for ~3 seconds, indicating download of the firmware file.
  • The router will write the firmware to flash during ~40 more seconds of occasional power LED blinks, and then will reboot by itself, ready for use.

Flash layout

Region Label
0x40000-0x10000 factory
0x50000-0xfb0000 firmware
0x0-0x30000 uboot
0x30000-0x10000 uboot-env
WIZnet WizFi630A
Latest release 18.06.1 Discontinued
Device Type Single Board Computer
Vendor WIZnet
Model WizFi630A
Flash 16 MB
RAM 32 MB
CPU Ralink RT5350 (ramips)
1 x 360MHz
Ethernet ports 0 x GBit — 3 x 100Mbit
WiFi

2.4Ghz: b/g/n

USB 1x 2.0
Switch Ralink RT5350
Bootloader U-Boot
Power Supply 3.3 VDC, 0.6 A
Serial check_circle
Additional resources